ElfBot NG

Understanding and Creating Hotkeys [Cavebot Hotkeys / Persistent Hotkeys / Hotkeys and Shotkeys]

One. Enabling Hotkeys and creating with the wizard. This is the window hotkeys
Click to view full size
The First Square, the square where ta Checkbox written in red in SS, if you mark it activates its hotkey (When I say 'enabled' is going to start work), if unchecked, then is disabled.
The Second Square, is the key that you want it to activate the hotkey. It can be any key on your keyboard. or any button of the mouse. To choose the key, click the second square and precione any key such as the Numero 9 numeric keypad.
The Third Square, is the command or action to be performed. You can have 96 hotkeys, each containing up to 512 characters.
Click to view full size
The box 'Enable Hotkeys' should be selected for their hotkeys work
Click to view full size

If you are inexperienced, and would make their own hotkeys, it is advisable to use the wizard, you simply click on 'Create Hotkey' to finish their problems.


Note currently not all commands are available in the wizard hotkey and also does not have all the variables and neither advanced commands, so if you're running behind more command say 'fodinhas' you have to learn on your own.

Click to view full size

Hotkeys with the wizard, they are easy to make, but as promised I will explain step by step:

The only action is to be executed when a key is pressed or hold the key if you do not want to use the hotkey every time and you want to use a certain key presionar UH, so every time you press the button coresponding to the hotkey Uh you had used one UH on you if you dexe key presionada will be using (like 2 seconds delay has farted quite vai)

The action will be executed repeatedly, once the key is you want activadase presionar when a key / mouse hotkey will activate automatically and will use every X milliseconds (1000 == 1 second) then, uh self auto 1000, vai UH acada you use in one second If you already chose, go to the next step by clicking Continue
Click to view full size
A window with several commands now. each command has its explicasao on the right as an example also, if you use the command UH, which heals a certain person when their HP are down 95%. When you have certesa the action you want, click on Continue
Click to view full size

Now, the wizard this hotkey wondering what command he should use. and in the case of the UH command, only to be told a parameter:

the desired target (the person you want to use uh). The target can be the name of a player, target (Last person you attacked q), friend (the first friend from your list of friends), subfriends (subfriends the first on your list), anyfriend (first friend or your first subfriend list), enemy (the first enemy aimcore selected by the bot), subenemy (the first subenemy aimcore selected by the bot), anyenemy (the first enemy or first subenemy selected by aimcore bot) or self (you) in this example, If you choose self is ready for the next step, click on continue.

depending on the command, a new window will appear that presisara another parameter. Now we will choose the condisoes

Click to view full size

The condition is a constraint for the command to be executed. If you follow this restriction, the command is executed, if not, nothing will happen. You have a number of conditions, you can only use these as the assistant provides hotkey, but you have infinite conditions if you are using variables.

(Variables)'m using as a command to heal me, I will put as condition stop me heal so when you lose 500 life (FULLHP - 500) If you're ready for the next step, click Continue.
Click to view full size


Now a window showing a new condisao apareseu, asking if you want utilisar a new condition if you want to choose, if not select the condition and click on Continue

3rd. Persistent Persistent Hotkeys Hotkeys are always active, will also be activated when the settings are loaded. It is useful to put things like the Caption hotkeys, Hotkeys Alarm, Self Healing Hotkeys, etc ... basically things that you do not want to occupy key because you will not use them on / off as often.

to activate you must click on the little box on the side of Persistent and click Edit to add your hotkeys
Click to view full size
Now a window appears

Click to view full size
Each hotkey (full) should be written in a single line (you write what would be written in the Third Square) After you have finished with all your hotkeys click on Save / Restart to turn. 4th.

The hotkeys Hotkeys Cavebot Cavebot works as Persistent Hotkeys, but instead of being active he will always work when you get a certain waypoint, is useful because there are some scripts that you do not want to stay active all the time, so you want when you are hunting in a certain place he use an alarm, or a healing hotkey (using 'Exura' / 'exana Mort' for knights).

To find it, do the following:
Click to view full size
Cavebot open the Section and click EDIT this window will appear:

Click to view full size

Each hotkey (full) should be written in a single line (you write what would be written in the Third Square) After you have finished with all your hotkeys click on Save / Restart to turn. 5th.

I used a Script Posted in TibiaScripT'll use this example: it is a Monk Trainer
Code:
auto 2000 set $highesthp 0 | foreach 'shootablemonsters' $monk {if [$monk.hppc > $highesthp && $monk.name == 'Monk'] {set $highesthp $monk.hppc | set $targetmonk $monk}} | if [$targetmonk.hppc < 50] {stopattack | end} | if [$targetmonk != $attacked] {attack $targetmonk.id}

all you have to do what eh copy and paste this CODE in the Third Square Hotkey or shortkey as shown in this image or in a row Persistent hotkeys:
Click to view full size
Now activate (the checkbox) and activate the hotkey (by pressing the key you chose), and try to make yourself ums hotkey.

Related Posts

1 comment:

 
Copyright © 2011 Tibia ElfBot NG. Designed by designer